Buluoer Laser reminds you that the laser cutting machine equipment is filled with antifreeze correctly

The cold wave hits and the temperature continues to drop. The fiber laser cutting machine equipment we use needs to be added with antifreeze to ensure the normal circulation of the internal waterway. But there are many people who have this question: They are all antifreeze, so what is the difference between car antifreeze and the antifreeze used on laser cutting machines? Can the car antifreeze be applied to the laser cutting machine? Does the laser cutting machine need coolant?

fhg

According to common sense, cars need to add antifreeze and coolant at the same time. One is to prevent the coolant from bursting and cracking the radiator and the engine cylinder block or head due to freezing when parking in winter; the other is to protect the temperature of the car’s water tank. Constant to ensure the normal operation of the engine.

Compared with automobiles, the laser cutting machine equipment also needs to add coolant, and in winter, it needs to add antifreeze. However, the coolant of the laser cutting machine is different from that of the car, and the laser cutting machine needs to be added with deionized water.

When buying a laser cutting machine, the water-cooled machine is a standard configuration, mainly to ensure that the temperature of the laser head and the laser is constant, and to prevent the high temperature in summer from affecting the cutting effect.

dsadsag

Note: Although the laser cutting machine only needs to add pure water (deionized water) to the water cooler in summer to achieve the cooling effect, mineral water cannot be used instead, because the mineral elements in the mineral water are inherently important to the water cooler. It’s not good. Over time, it may cause pipeline blockage.

If it comes to winter, the laser cutting machine needs to add antifreeze like the car, because the deionized water in the water cooler will freeze, and the antifreeze needs to be added to prevent the deionized water from freezing, which is what we often call antifreeze.

But the antifreeze of the laser cutting machine is different from the antifreeze of the car. The main reason is that the antifreeze function of the two is different for the liquid. Here we must first clarify: the composition of automobile coolant is complex, and it mainly depends on automobile-specific antifreeze for antifreeze; while the coolant of laser cutting machine is only deionized water with a single component, and it mainly depends on antifreeze for laser cutting machine. The liquids targeted by the two are inherently different, so the composition must also be very different.

In addition, the use method of laser cutting machine and automobile antifreeze is also different. Automobile antifreeze is directly prepared in a good proportion; while laser cutting machine antifreeze needs to be mixed and added according to the temperature in the area. Because different concentrations of ethylene glycol correspond to different freezing points, generally speaking, the antifreeze for laser cutting machines and deionized water are added in a ratio of 3:7. If it is antifreezing for laser cutting machines in Northeast and other regions, then this ratio will be For replacement, the ratio of antifreeze to deionized water may be 5:5; 6:4.

In summary, we know that the laser cutting machine requires coolant (deionized water) and antifreeze (different concentrations of glycol), and these two liquids are completely different from the coolant and antifreeze used in cars , Do not confuse the two. Otherwise, the consequences of adding mistakes are immeasurable.

Now, the temperature in the north continues to drop, the cold wave is approaching, and the temperature drops to 0℃. The Bloer laser cutting machine manufacturer once again warmly reminds you: “Be careful to protect your laser cutting machine equipment from the severe cold, according to the instruction manual or Contact our Xiaobu engineers directly to do the work of adding antifreeze in time.

cdsfd

This article is from Shandong Buluoer Intelligent Technology Co., Ltd. Please indicate the source for reprinting!

Note: Although the laser cutting machine only needs to add pure water (deionized water) to the water cooler in summer to achieve the cooling effect, mineral water cannot be used instead, because the mineral elements in the mineral water are inherently important to the water cooler. It’s not good. Over time, it may cause pipeline blockage.

If it comes to winter, the laser cutting machine needs to add antifreeze like the car, because the deionized water in the water cooler will freeze, and the antifreeze needs to be added to prevent the deionized water from freezing, which is what we often call antifreeze.

But the antifreeze of the laser cutting machine is different from the antifreeze of the car. The main reason is that the antifreeze function of the two is different for the liquid. Here we must first clarify: the composition of automobile coolant is complex, and it mainly depends on automobile-specific antifreeze for antifreeze; while the coolant of laser cutting machine is only deionized water with a single component, and it mainly depends on antifreeze for laser cutting machine. The liquids targeted by the two are inherently different, so the composition must also be very different.

 

In addition, the use method of laser cutting machine and automobile antifreeze is also different. Automobile antifreeze is directly prepared in a good proportion; while laser cutting machine antifreeze needs to be mixed and added according to the temperature in the area. Because different concentrations of ethylene glycol correspond to different freezing points, generally speaking, the antifreeze for laser cutting machines and deionized water are added in a ratio of 3:7. If it is antifreezing for laser cutting machines in Northeast and other regions, then this ratio will be For replacement, the ratio of antifreeze to deionized water may be 5:5; 6:4.

In summary, we know that the laser cutting machine requires coolant (deionized water) and antifreeze (different concentrations of glycol), and these two liquids are completely different from the coolant and antifreeze used in cars , Do not confuse the two. Otherwise, the consequences of adding mistakes are immeasurable.

Now, the temperature in the north continues to drop, the cold wave is approaching, and the temperature drops to 0℃. The Bloer laser cutting machine manufacturer once again warmly reminds you: “Be careful to protect your laser cutting machine equipment from the severe cold, according to the instruction manual or Contact our Xiaobu engineers directly to do the work of adding antifreeze in time.


Post time: Oct-30-2021

Send your message to us:

Write your message here and send it to us